Online Training Manual for LG Products - Spin Vibration and Noise      

Check the feet to be sure the washer is properly leveled and the feet don't move. Adjust as necesary.

Ensure the shipping bolts have been removed for proper operation. Save the bolts in case the washer must be shipped for service or if the customer moves. DO NOT move the washer without having the bolts installed. The proper place to remove the bolts in in the laundry area at the time of installation.

There are two different sizes of shipping bolts. The shorter bolts go into the upper holes, and the longer bolts go into the lower holes. One of the longer bolts has a clamp on it to secure the power cord to the back of the machine. (The real purpose is to ensure the bolts are removed prior to machine operation.) See ADDITIONAL INFORMATION here.

Check the large bolt that secures the rotor to the shaft. See MOTOR for more information.

Remove the back cover and check the damper pins to ensure none of them has come loose. Check the dampers to ensure none of them has separated. See DAMPERS. In most cases, the damper is ruined if it is separated. If you replace a damper, replace all three as a set.

Remove the top of the washer and check the two drum support springs to be sure they weren't knocked out of their holders.

Questions? Comments! Concerns? Report an error?
Let us know!
An e-mail should solve the problem.