The washer must be empty and off to enter the test mode.
1 Press and hold SPIN SPEED and SOIL LEVEL.
2. Press POWER. The buzzer will sound twice.
3. Press START / PAUSE to cycle through the test modes. NOt every model performs every test. You can see the service manual for the particular model you are repairing if you need more specific information.
(See chart, below.)
Notes:
1. Insert a zero at the end of the displayed numbers larger than two digits to determine the actual rpm. 62 indicates either 62 or 620 rpm; 115 indicates 1,150 rpm.
2. Water levels are displayed as a frequency; this is interpreted by the main board as a water level but is meaningless to humans.
Questions? Comments! Concerns? Report an error?
Let us know!
An e-mail should solve the problem.