Does the FE error code show in the display?
|
Does the FE error code show in the display? |
 |
Press WASH/RINSE and DELAY WASH simultaneously, is the water level frequency displayed greater than 21.3 kHz? (Instructions for your machine may vary. Check your owner's manual or service manual for complete instructions.) Check the air chamber and tube to the pressure switch to ensure they are not clogged. DO NOT blow into the hose attached to the pressure switch. That wiill rupture the diaphram in the pressure switch. It must then be replaced. |
 |
Disconnect the power to the machine and use a jumper to apply power (120 VAC) to the inlet valves. (The black wire usually goes first to the hot valve and then to all the cold valves.) If the valves open continuously when the power is applied, replace the main board. If the valves fail to open, replace the failing valve. (The cold valves must be replaced as an array.) |
Questions? Comments! Concerns? Report an error?
Let us know!
An e-mail should solve the problem.