IMPORTANT SAFETY NOTICES

The information in this training manual is intended for use by persons who have adequate backgrounds of electrical, electronic, and mechanical experience. Any attempt to repair a major appliance may result in personal injury or property damage. The manufacturer claims no responsibility for the interpretation of this information not can it assume any liability in connection with its use.

If the information in this manual is not followed exactly, fire or explosion may result, causing property damage, injury, or death. Gas (natural gas or propane) is explosive.

If you smell gas:

• Do not try to light any appliance.
• Do not touch or operate any electrical switch.
• Do not use any phone (wired, portable, or cellular) in the building.
• Immediately call the gas supplier from a neighbor’s phone.
• Follow the gas supplier’s instructions.
• If you can not contact the gas supplier, call the fire department.

To avoid personal injury, disconnect the power before servicing the appliance. If electrical power is required diagnosis or testing, disconnect it immediately after performing the necessary checks.

If grounding devices, wires, screws, straps, clips, nuts, or washers used to complete a path to ground are removed for service, they must be replaced in their original positions and properly secured.

This oven is not designed for open-door cooking.

The self-cleaning gas oven has a tactile, electronic touchpad control. It is user-friendly and easy to operate.

The surface burners are controller by manually operated valves.

The convection baking and roasting cycles provide even cooking and superior baking results.

The nomenclature plate, with model and serial numbers, is on the oven frame above the warming drawer. This plate also shows the burner ratings, fuel type, and pressure settings from the factory.

The mini-manual is in an envelope taped behind the back panel.

The propane (LP Gas) instructions are attached to the back of the range. Inside, near the gas valve, is a set of LP orifices for the conversion.

We recommend re-using this bracket to save the natural gas orifices in the event the range must be restored to burn natural gas in the future.

The gas conversion should be performed ONLY by a certified gasfitter who has the proper training and tools to accomplish the job.

Questions? Comments! Concerns? Report an error?
Let us know!
An e-mail should solve the problem.