Cooktop Online Training Manual for LG Products - Electric Range Cooktop

COOKTOP and SURFACE ELEMENTS


18_2
Unplug the range before beginning.

Open the oven door.

Remove 3 screws under the front of the cooktop.

Close the oven door.



18_3
Lift the cooktop from the front and remove the screw securing the ground wire.



19_1
Lift the glass cooktop slightly and pull it slightly forward to expose the connectors on each side.

Unplug both connectors. You’ll need to squeeze the tabs to separate the halves of the connectors.

Put a piece of cardboard or an old blanket over the range top and turn the cooktop over to service it.



SURFACE ELEMENT


19_2

Remove the wires from the elements and limiter terminals. The connectors may be equipped with release tabs that must be pressed to release the connector.

Remove the element bracket screw to release the bracket. Lift the bottom of the bracket just far enough to lift the element out.

Notice the numerous slots in the bracket. Each slot is numbered. Be sure to reinstall the element in the correct slots. You might want to mark all the slots to indicate which is which.



Questions? Comments! Concerns? Report an error?
Let us know!
An e-mail should solve the problem.